How to Clean High-maintenance Surfaces

Google+ Pinterest LinkedIn Tumblr +

Preserving your floors, appliances, and countertops as beautiful as they were on day one is not an easy task. In fact, most home-owners never succeed. However, it is not impossible. We will share with you some pretty smart tips on how to clean high-maintenance surfaces in order to preserve their shine and prolong their life. If you follow these easy steps correctly, you will succeed with this task. 

Problem #1: Dirt is dulling your shiny hardwood floor and it is making it hard to reseal.

The solution: In order to keep your floor grit-free, all you need to do is to sweep it regularly. You can plow away grime with a push broom – just wrap a damp rag around it and you’;;re good to go. Try wood-friendly cleaners for though messes – they won’;;t damage the polish. If your floor is showing any wear, you have to apply some polyurethane as soon as possible in order to protect it.

It would be wise of you to avoid ditch silicone and acrylic-wax polishes and conditioners – they can leave residue that will prevent polyurethane from adhering to the surface.

Problem #2: Aggressive cleaning can lead to scratches.

The solution: This applies especially for fingerprints. However, you can easily remove fingerprints without leaving any streaks behind by using undiluted white vinegar. Just rub in the direction of the grain with a soft cloth moistened with vinegar. After that, blot up any excess moisture with a dry cloth. However, you should avoid using bleach since it is a chloride. Also, abrasives are out of the question – they will surely bring the scratches.

Problem #3: Veined stone can easily get scuffed, stained, and scratched if not managed properly.

The solution: Veined stone is often used for beautiful countertops. In order to protect it properly, you can use a non-toxic water-based sealer every six months. For general cleaning, just use a mild detergent and deal with stubborn stains using hydrogen peroxide – always test in a hidden spot before you clean with hydrogen peroxide. Small scuffs and scratches can be removed using ultrafine steel wool. However, you should avoid using anything acidic – even vinegar. It can dissolve the top layer of the stone and ruin it for good.

Problem #4: Porous material chips and gets easily stained if not managed properly.

The solution: For porous surfaces such as concrete counters you can use a food-safe sealer – this should be enough to protect the surface from stains. Apply the sealer once each six months to a year, depending on how often you use that surface. Notice any discolouration? You can use a fine-grit diamond polishing block in order to deal with it. You can find such blocks in any home improvement store near your home. What you should avoid when dealing with porous surfaces is any urethane-based sealer. Also, don’;;t place hot pots down on concrete – this will results in flaking.

Problem #5 Granite is durable but it can be stained easily – especially by oily substances.

The solution: You can easily clean granite using warm water and maybe some diluted liquid soap – dry immediately afterwards. If you have to deal with stains left from oily substances then it would be best to use a non-toxic degreaser. A poultice made from cornstarch and cleanser will also do the trick. Coat the surface from six months to a year using a water-based sealer. As with marble, acid-based cleaners can damage the surface so you should avoid using them.

And if you don’;;t feel like cleaning your home on your own, you can always turn to a professional cleaning company. This company provides domestic cleaning in London – their services are affordable and efficient!


About Author

Leave A Reply