Because you are looking online, you’ll find many deviations in the value and precision of that particular information. So we also advise that you browse through a plethora of honest and plausible sources when you’re doing some studying. Consequently, we’re here to offer you solid tuning and waxing suggestions for ski and snowboard so you’ll get everything you can out of your sport.
There are lots of excellent reasons to have a good edge and wax job on your skis. Because you can fall due to dull edges, we’re talking safety here as well as performance. If you ski edges are dull, they won’t be able to grip properly if you’re skiing on ice. You will end up falling more if your skis can’t grip. The wax on your skis needs to be right for your conditions in addition to being properly applied. The outside temperatures also need to be taken into consideration. You can be slowed down by the wax on your skis if it is too cold out for what you used. So be sure to take all these factors into consideration when you’re planning ahead. By just doing the minimum amount of ski base and edge maintenance, you can help yourself out a lot. It’s always recommended to do as much as possible, but not everyone has the time to do that. So, if you’re a bit of a minimalist with things, then at least do the minimum amount of basic care for your skis or snowboard. Be sure to dry your gear after a day of skiing or boarding. Hit the edges with a diamond stone, but do it properly, so you can keep a good sharp edge on your skis. Knowing when the edges are sharp will come with practice.
You are better off using a wax rated for slightly colder temperatures when waxing your skis. The reason for this is simple. A higher temperature condition wax in the wrong conditions will make your skis a bit on the sticky side. This means that you won’t glide as well or fast as you would hope. You don’t want to have to skate; you want to ski. Applying wax to your skis is similar to ironing your clothes. Similar to ironing clothes, avoid lingering in one spot for too long. When doing a hot wax job, you don’t want to produce smoke. Before doing any other work with the ski, let it cool for about half an hour.
You’ll discover that if you learn how to tune and wax your skis and snowboards the right way, your gear will last quite a bit longer. Accurate care is also a wonderful and clever notion for safety concerns plus you’ll have gains in your routines. So always avert yourself from forgetting about your winter gear.