At the beginning of industrialization, something was required to move products from one place to another. Even if it was only conveying large amounts of coal from the bottom of the mine to the surface, a system was needed that would enable the owner to get the complete product as quickly as possible. The look of the conveyor belt was designed to satisfy that need, with the belt getting made of a piece of leather or wood strung between two wheels. The workers would turn these wheels, and propel the merchandise from one area to another.
As latest factories were developed, it became necessary to move giant hundreds from different parts of the building, usually bringing the parts together so that the finished product might be assembled. This is where conveying belts came into their own. It is highly unlikely that anyone going into a factory or warehouse, irrespective of what the size, will be unable to see a minimum of one conveyor belt while they are there. They are often used in the food industry, for instance, where ingredients travel along the belts and are handled by machines to supply the finished product, however almost all kinds of factory use a belt of some type.
One such conveyor belt that is very common in industry is that the gravity or gravitational belt. This can be placed upon an incline, and moves under the gravitational drag of whatever is on the canvas. This is the same principle that guided the design of water mills, where because the bucket at the top became full of water, it might move down the wheel, rotating that wheel and inflicting another bucket to rise to the top. These incline belts are popular because they need no kind of electrical input and the only force necessary is that of the earth’s gravity system, merely pulling the heavier object towards the ground.
However, since people often need to carry things from one end of a factory to the other, these conveying belts wont be always the perfect solution. One other system is that the mechanical belt, that has rubber surfaces that do not carry a lot of friction. In the factory, the shortage of electrical friction being carried by the belt is vital, since the static might discharge into machinery, or perhaps through workers, if the belt did conduct it. These sorts of belts are the most practical and inexpensive means of transporting parts, ingredients or perhaps finished products from one area in the warehouse to another.