Ever notice the fan inside your laptop computer making strange sounds? Is your system beginning to perform more slowly? Does the bottom of device feel warmer than when your laptop was new? Does the screen need to be cleaned? If so, follow these steps to keep the inside and outside of your mobile computer nice and clean and working faster and smoother.
Cleaning the keys
With the power still off on the laptop, utilize a clean lint-free cloth with a gentle window cleaner. Avoid the use of bleach or any other powerful professional cleaning agent. Spray the cleanser on the fabric, not the actual keys. Softly clean every key until nice and clean. Allow the keys dry out for approximately twenty or so minutes before turning the mobile computer back on.
Cleaning the monitor
The LCD or LED display screen on a notebook must be cleaned every so often. Airborne dirt, dust and anything else that drifts in the air could be attracted to the exterior of the screen. Make sure that the power to the unit is off. Work with a clean normal water wet lint-free fabric to softly wipe any kind of light particles from the surface. Don’t use any kind of chemical type cleansing agents. If required, you can purchase a LCD screen cleaning kit which has a really mild cleaner and cloth.
When you can actually see dust and hairs in or on the vents at the bottom and side of the laptop case, you can be sure that there’s more within the laptop computer. The only way to get it all out is to open up the notebook case. Don’t try and blow it out from the outside. This will only clog it up the inside of the case. All laptop cases will come apart reasonably easily. There are several small screws that keep the case together. There will probably be little plastic or rubber caps covering screws that keep the monitor in place. Nearly all notebooks will be taken apart from the bottom part. Make sure that the electric cord and battery are detached before beginning. Take away the hard disk and place it in a safe place out of the way. Do not use cordless tools or magnetic screwdrivers. If the laptop case is entirely apart, you will observe the ‘dust bunnies’ sitting near the case cooling fan and processor cooling heat sink. Clear away large dust balls using a pair of tweezers. Pressurized air in a can works well to blow out the dirt on and round the system board and the keys. Be sure to keep the notebook case upright when using canned air. If the can of air is held downward when utilized, the gas in will end up a liquid. This will likely ruin the components in the laptop. When reassembling the mobile computer, be sure to make use of the correct screws in the correct places. Some screws tend to be much longer than others, and have to be connected where the cables were formerly. Pay special attention to any ribbon wires and their particular connections. The keyboard and mouse pad uses these. Ensure that that the wedge or compression connectors are tight before proceeding to the next step. You don’t want to need to open the notebook case again until it really is time to clean it again. Once you are finished, your mobile computer will likely be as good as brand new.