Improve Your Dial Up Speed

Google+ Pinterest LinkedIn Tumblr +

Improve Your Dial Up Speed
 

Follow these simple steps.

You can’t assume that just because you connected at a speed like 48.3KBps that you will stay there. Today’s modems automatically fall back to a lower speed if the line noise is too high to maintain a faster connection, but sometimes they fall back too soon or too far.

Here’s how to do it:

Click Start the button.
Select Settings.
Click Control Panel.
Double-click on the Modems icon.
Select your modem.
Click the Properties button.
Click the Connections tab.
Click the Advanced button.
In the “Extra settings” field, type S36=7
Click OK to save your settings.

This will force your modem to try to stay connected at high speeds in two different ways before dropping back to an asynchronous mode with auto speed buffering.
2.2 Increase your bandwidth by 20%

This is one of the most popular tricks to increase your connection speed.
i am wrong here if i say “to increase your speed” cuz in this trick you recover the band width that you already deserve.So here it goes.

Increasing Band-Width By 20%
Microsoft reserves 20% of your available bandwidth for their own purposes like Windows Updates and interrogating your PC etc

To get it back:

Click Start then Run and type “gpedit.msc” without quotes.This opens the group policy editor. Then go to:
Local Computer Policy then Computer Configuration then Administrative Templates then Network then QOS Packet Scheduler and then to Limit Reservable Bandwidth.

Double click on Limit Reservable bandwidth. It will say it is not configured, but the truth is under the ‘Explain’ tab i.e.”By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default.”
So the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the system to reserve nothing, rather than the default 20%.It works on Win 2000 as well.

 

Share.

About Author

Leave A Reply